Victron Blue smart Charger- 30 amp - 3 Output BPC123044022

Victron Blue smart Charger- 30 amp - 3 Output BPC123044022

Mains Cord UK for Smart IP43 / Skylla-S Charger 2m ADA010100200

Mains Cord UK for Smart IP43 / Skylla-S Charger 2m ADA010100200

Victron Phoenix Smart IP43 Battery Charger 12V - 50A PSC125053085

Bluetooth Enabled 3 differentt charging banks Automatic voltage compensation Adaptive battery management- including Lithium Storage mode Direct or remote control
€545.00
Availability: In stock
SKU
PSC125053085
Bluetooth Smart enabled Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available. Phoenix Smart (3): three full current outputs to charge 3 battery banks Each output can supply the full rated output current. But the total of the 3 outputs combined can never exceed the current rating of the charger. Automatic voltage compensation The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details. Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used. The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure. Also charges Li-ion (LiFePO₄) batteries Alternatively full control of voltage and current can be achieved with Bluetooth. Fully programmable charge algorithm The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications). Remote on-off The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details. VE.Direct interface For a wired data connection to a Color Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website. Programmable relay Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

We're on holidays 14-24th August

We are Closed For Holidays from Friday 14th August @ 5pm Until Monday 24th August @ 8am.

The shop will be closed, there will be no phone service, no shipping available, no email service.

Please be aware that any orders placed online during this period will be placed in a queue for dispatch the following week.

Apologies for any inconvenience this may cause.

× CLOSE