Large Van Insulation Kit- Dodo & Eco VIB3

Large Van Insulation Bundle- A Key element To Every van Conversion

A superb cost effective value pack, this kit contains enough sound deadening and insulation to treat the crucial rear sides and roof areas of a typical van.
 
The rear cabin area can be improved dramatically with the application of sound deadening and insulation. Dodo Mat can upgrade your van project in a few simple steps.
 
Suitable for:

• Renault Master LWB
• Fiat Ducato LWB
• Mercedes Sprinter MWB
• Volkswagen Crafter MWB

The quantities in these bundles are for guide purposes only, and cannot be exact- if you have a LWB or XLB VW Crafter/Sprinter sized Van, please increase quantities accordingly

N.B Treatment assumes 50% deadening coverage of key metal panels, for a more comprehensive deadening treatment simply add one more Hex roll.

The Dodo Mat DEADN SE sound deadening is applied first to single skin steel areas, such as the side panels, roof and rear doors. This is a simple peel & stick application using a coverage ratio of approx 50% of metalwork. Dodo Mat DEADN Hex SE provides a lower weight solution for the van owner wanting a quiet smoother drive without adding unnecessary mass. The unique Dodo specification chemistry of the synthetic butyl core effectively deadens panel vibration without the excessive bulk of competitor products.
 
To add to the installation add a secondary layer of Dodo Thermo Liner insulation to the sides and roof. This product will help regulate the temperatures inside the van. Cooler in summer and warmer in winter. The dense 6mm foam layer will also work in harmony with the Dodo Mat sound deadening layer to improve sound proofing even further.

The final layer of insulation is the Ecowave Polyester fibre which has excellent thermal and acoustic properties , which is added to all of the larger cavities, and into those hard to reach pillars

 
The final van will be quieter with improved ride quality and the interior comfort will have been upgraded significantly.
 
All of the products are easy to apply, Dodo can be cut with a sharp knife, and is self-adhesive, Ecowave does not require any tools to install, and can be held in place using our Flexi Trim high Temp adhesive

The products are designed specifically for automotive use and therefore are fire safety tested to ISO 3795:1989 and will not absorb moisture or mould.
 
Kit Includes:

2 x Dodo Mat DEADN Hex 50 Sheets (9.4sq.m coverage) or

3 x Dodo DEADN Rolls -11.1 sqm coverage

Or add extra roll/sheets if required

2 x Dodo Thermo Liner V3 10m Roll (10sq.m coverage)

Or add extra roll(s) if required

1 x 20m roll of EcoWave Insulation (700mm Tall)

add extra roll if required

 
Dodo Mat DEADN SE Sound Deadening Spec

• Large Bulk Roll by 2 boxes of 50 Sheets
• High Grade Butyl Construction
• Hex embossed aluminium
• Very Soft & Flexible For Easy Installation
• 1.8mm Thick with Strong Adhesive
• Classic Aluminium finish
• Stop Rattles, Vibration & Noise
• Lower Road, Exhaust, Engine & Transmission Noise
• Heat Resistant from -40°C to +120°C
• Flammability tested for vehicle interiors ISO 3795:1989
• Fully Water & Oil Resistant
• Very Low Odour compared to bitumen and inferior mats
• Peel & Stick Application
• Designed in the UK
• 3 rolls giving 11.1 sqm or 2 boxes of 50 sheets 9.4 sq.m coverage 

Dodo Thermo Liner Insulation Spec

• Latest 2023 "v3" Specification
• Dodo Thermo Liner Large Roll- by 2
• Roll size = 10m x 1m- 
• Roll Coverage = 10sq.m / 107.6sq.ft- 2 rolls equal 20sqm
• Thickness = 6mm
• Keeps the heat of the sun out during summer
• Keeps warmth in during winter
• Significant noise reduction
• Reduces panel rattles
• Higher thermal efficiency than open cell foam
• Reduces condensation & acts as moisture barrier
• Will not absorb water like cheaper open cell foams
• Water resistant closed cell design
• Strong Self Adhesive
• Flammability tested for vehicle interiors ISO 3795:1989
• Designed in the UK, Manufactured in EU

EcoWave Insulation

• Polyester Non Woven Acoustic Thermal Insulation Dacron 14 oz
• Fine Fiber Non Woven Insulation
• Ideal for vehicle insulation purposes
• High quality acoustic absorption material
• Flame Retardent
• Product Dimensions:20m by 0.7
• Weight: 14oz - 396gms
• Nominal Thickness: 35-40mm