Ford Custom 2024 and VW T7 L1 & L2 , 31 Litre Waste Water Tank Kit - CAK-240W

Kit includes:

1 x 31 litre water tank with waste connections pre-welded in:  1 x 20mm inlet and 1 x 25mm drain. (Nut-in option available)
Mounting Kit of galvanised brackets with hookbolts, nuts and locking nuts
Remote drain tap kit with hose and hose clips
 

This waste tank is designed to fit on the driver side of the vehicle between the chassis and the sill behind the driver’s front step, rearwards.  The raised central part of the tank fits up in between the cross members to touch the floor.  There is a metal bracket on the inner sill of the vehicle that prevents the front corner of the tank sitting in position.  This is an unused bracket and will need to be bent either forwards or backwards out of the way to allow tank to sit properly in position. 

The tank is fitted using two identical brackets.  Each bracket has one short leg and one long leg.  The long leg sits on the chassis side of the tank and the short let sits on the sill side of the tank.

The rear bracket chassis side requires a 4” hookbolt hooked into an existing hole in the base of the chassis.  The sill side requires a 3” hookbolt hooked into an existing oval hole in the inner sill directly opposite.

The front bracket chassis side requires a 4” hookbolt hooked into an existing hole in the base of the chassis.  The sill side requires a 3” hookbolt and needs a hole to be drilled to position directly opposite opposing bracket hole.